ITEM	PART	DESCRIPTION	QTY
A	MS00-260-kd	Tandem Pivot Ass’y RH (s/n 0200-0480)	1
&	MS00-266-kd	Tandem Pivot Ass’y LH (s/n 0200-0480)	1
or	LTA-160-kd	Tandem Pivot Ass’y RH (s/n 0481-0699)	1
	LTA-166-kd	Tandem Pivot Ass’y LH (s/n 0481-0699)	1
B	RF02131-00060-kd	SCREW-SET/SQ (1.00 x 5.00)	4
&	RF03020-01000-kd	NUT-JAM (1.00) NC/G5	4
C	RF02022-00980-kd	BOLT-HX (0.75 x 1.75) NC/G5	4
&	RF05031-00120-kd	WASHER-LOCK (0.63) MED	4
&	RF03021-00118-kd	NUT-HEAVYHEX (0.63) NC/G5	4
D	MS00-262BC-kd	Bushing 2.00” ID x 3.88” L (s/n 0200-0480)	2
or	LTA-164-kd	Bushing 2.00” ID x 5.75” L (s/n 0481-0699)	2
E	RF02022-01130-kd	BOLT-HX (0.75 X 5.75) NC/G8	2
&	RF05031-00140-kd	WASHER-LOCK (0.75) MED	2
&	RF03021-00190-kd	NUT-HEX (0.75) NC/G5	2
F	MS00-038ZA-kd	Axle with Slotted Nut & Cotter Key	2
G	H33-kd	Pivot Pin, Threaded (s/n 0200-0480)	1
or	LTA-155-kd	Pivot Pin, Threaded (s/n 0481-0699)	1
&	RF03024-00260-kd	NUT-SLTD (2.00) NC/G5	1
&	RF06020-00083-kd	PIN-COTTER (0.375" D x 4.00" L)	1
H	M000-405-kd	Bushing, Weld-In (2.00” ID)	2
I	RF02022-00739-kd	BOLT-HX (0.63 x 1.00) NC/G5	1
&	RF05020-00100-kd	WASHER-FLAT (0.63) MED	1
J	MS00-270BZ-kd	Tandem Carrier Arm (s/n 0200-0480)	1
or	LTA-150-kd	Tandem Carrier Arm (s/n 0481-0699)	1
K	P15-kd	Pin, 1.43” D x 4.50” L (s/n 0200-0480)	2
or	P26-kd	Pin, 1.75” D x 7.00” L (s/n 0481-0699)	2
L	RF02022-00265-kd	BOLT-HX (0.38 X 3.00) NC/G5	2
&	RF05031-00080-kd	WASHER-LOCK (0.38) MED	2
&	RF03021-00022-kd	NUT-HEX (0.38) NC/G5	2
M	7001-H021-kd	Cylinder Assembly (4” x 16”) (s/n 0200-0480)	2
or	7001-H028-kd	Cylinder Assembly (5” x 16”) (s/n 0481-0699)	2